Poultry Heaters – LPG / Natural Gas or Oil
Poultry Heaters – The “Eurochick” Poultry shed heater responds to the growing breeders requirements to have a warm air heating systems with clean “combustion free” air for their poultry shed heating . The increased power of 130 kW input (120kW Output ) compared to our “FATLE” Poultry heater range, provides the advantage of potentially using less heaters for each poultry shed . Along with the other advantage of requiring no or less ventilation to assure air renewal to the poultry shed thanks to the indirect heat exchange technology with obvious advantages from the point of view of efficiency and energy consumption.This Poultry heater has an efficiency of 92% , and is available with a LPG or Natural Gas Burner or an Oil Burner , to suit your Poultry heating system requirements.The installed heating capacity, and fuel consumption of our indirect Poultry heaters is typically 25% lower when compared to a direct fired poultry heating system, resulting in lower capital cost and more importantly, lower fuel costs year after year.
The totally sealed combustion chamber reduces excess humidity in the environment, and eliminates completely the supply of CO2, CO and NOx resulting from the combustion process, reducing the need of ventilation and ensures a healthy growth environment for animals. The combustion chamber and smoke tubes of Eurochick Poultry Heater are entirely made of stainless steel AISI 430.
This Poultry heater provides direct air distribution (i.e they do not require any air ducts) and can be configured for external or internal installation and allows you to mix the necessary amount of internal return air with fresh outside air, if so required
These Poultry Heaters can be installed outdoors without any additional protection saving precious inside spaces for breeding.The combustion is made with a blown burner: extremely reliable technology that ensures a stable operation of the warm air heater even in the most demanding conditions. The adoption of this technology allows the use of gas and oil burners without any need to modify the product , allowing the customer / breeder to select his or her preferred fuel.
Indirect fired Poultry Heaters = Clean hot air
The heat exchanger benifits from a sealed combustion, meaning the combustion gases are exhausted through a dedicate flue pipe system and the combustion air is taken from outside, with the following benefits:
- Better health and safer growth of animals in all their life stages
- Reduction of fire risks with advantages also on the insurance premiums
- No CO2 – NOx – CO derived from the combustion process
- No O2 consumption derived from the combustion process
- No water vapour derived from the combustion process
- Dry atmosphere and dry litter
- Reduced need of internal air renewal, i.e. savings on energy and fuel
- Easier management of ventilation, promoting the animals wellbeing needs
- Possibility to control and mix fresh external air with the return air
- Reduction of the total heating power, less heating equipment to be installed
The problem with Direct fired Poultry heaters is – Direct Fired means that all produced combustion gases end up inside the building. It is a necessity to have a minimum ventilation rate to eliminate these gases in order to maintain a healthy climate for the birds ,That means additionally energy costs !
The benefits of Indirect Poultry Heaters are – As no CO2 or humidity is produced by our indirect poultry heaters and no oxygen is needed for burning, the ventilation rate is considerable lower in the poultry shed / house. The majority of the time there is no minimum ventilation needed during the first 3 days of life of the birds, which decreases the energy costs significantly. With our poultry heater, the recirculation of the warm air is guaranteed and provides an optimum climate for birds to thrive
Poultry Heater – Technical Data
Noise level – 68dBA
Effective throw – 45 Mtrs
Poultry Heaters – Installation External or Internal
In the above picture, you can see the Poultry Shed Heater , installed externally to the Poultry Shed / House. Making the Heater easily accessible for service during a crop cycle as the heater is installed outside the poultry house. The risk of contamination is therefore reduced, and with bio security playing a much more important requirement for the breeder, an external unit provides a solution for this. Any removal or winching the heaters for cleaning , as with some other types of suspended poultry heaters is unnecessary as the heaters are installed in the wall of the poultry house or shed.
Or another option is to have the Poultry heater installed internally – like so
As you can see, we do a full range of accessories, that allows the customer to complete the job, to whatever requirements they have for their Poultry Heating System requirements
Poultry Shed / Houses Heating Systems
There is an interest article,which gives a great oversight with regards to Poultry Shed Heating, and what factors or points are relative , and most importantly , what you need to be aware of when heating you poultry shed in the winter months. This well written article, basically reinforces the argument that indirect poultry heaters are beneficial when used in breeding / poultry sheds, as direct fired units, which add both moisture and CO2 into the area being heated. This moisture can start the bedding/litter to “go off” even in the early stages. It is also recommended that “Producers should ensure floor temperatures are pre-heated to between 28C and 30C, with an air temperature of up to 33C to aid floor heating. Relative humidity should be between 60% and 70%.” With our poultry house heater, you can have the ability to mix fresh external air, with the recirculated warm air, and control the humidity with the required levels
Should you require anymore assistance or information on our Poultry Heaters / Poultry Shed or Farm Heaters , or just to get the best prices on the UK market, please don’t hesitate to contact our sales team on 01202 822221 or click here for our email contact form